![]() The board should now be flashed with micropython and the micropython repl prompt will be available on the serial port.įlash the board and configure it to automatically start as a cloudmanager client Verifying 0x8734c (553804) bytes 0x00000000 in flash against /tmp/cloudmanager-micropython-esp8266/local/lib/python2.7/site-packages/cloudmanager_micropython_esp8266/firmware/firmware-combined.bin. Run the flash_esp_image utility without arguments.Įsptool.py -port /dev/ttyUSB0 -baud 115200 erase_flashĮsptool.py -port /dev/ttyUSB0 -baud 115200 write_flash -verify -flash_size=32m -flash_mode=qio 0 /tmp/cloudmanager-micropython-esp8266/local/lib/python2.7/site-packages/cloudmanager_micropython_esp8266/firmware/firmware-combined.bin.This is the simplest option, the utility will attempt to guess the serial port the device is on and flash it. To just flash the image to the board, if the are no other serial devices installed
0 Comments
Leave a Reply. |